2N® 2Wire
2N® 2Wire is a set of two convertor units that lets you connect any IP device installed at locations with no IP infrastructure to your network. Connect the device, such as an IP intercom, to one unit and a switch to the other unit. Then connect both convertor units to each other using the existing analogue wiring. This will transmit audio and video as well as supply power.
- Ethernet including PoE over 2 wires
- Long reach
- Up to four sets per installation
Product features
- Using legacy analog 2 wire cabling for IP intercom connection including PoE power supply
- Saves cost for UTP cabling and makes possible to install IP intercoms on legacy infrastructure
- Alternatively one leader unit can support up to four followers
- Long range Ethernet extension over 2 wires or coax
- IEEE 802.3 af/at Compliant 40 Watt PoE+ for IP intercom power supply
- Easy configuration, no IP address and network setup required, plug&play
- Calculated MTBF = 340,000 hours
Techninė specifikacija |
Dimensions |
75 x 40 x 40 mm |
Full Description Line |
Type Adapter |
Operating temperature range |
-10°C to +50°C |
Product Type |
Adapter |
Shipping Box Depth |
24 |
Shipping Box Height |
5.4 |
Shipping Box Weight |
0.8 |
Shipping Box Width |
16.4 |
Shipping box quantity |
1 |
Unit Brutto Volume |
0.002125 |
Unit Gross Weight |
0.8 |
Unit Net Weight |
0.24 |
Vendor Homepage |
www.2n.com/en_US/products/intercoms/2n-2wire |