Kingston Fury Beast KF426C16BBK2/16 16GB (8GB x2) DDR4 2666Mhz Non ECC DIMM
FURY KF426C16BBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 8GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. Each 288-pin DIMM uses gold contact fingers.
| Techninė specifikacija |
| CL |
16 |
| Frequency speed |
2666 |
| Full Description Line |
Fury Beast|DDR4|8GB|Number of modules 2|2666 MHz|288-pin DIMM|CL 16|Nominal voltage 1.2 V |
| Memory type |
DDR4 |
| Number of modules |
2 |
| Shipping Box Depth |
17 |
| Shipping Box Height |
1.5 |
| Shipping Box Weight |
0.1 |
| Shipping Box Width |
9.5 |
| Shipping box quantity |
1 |
| Total capacity |
16GB |
| Unit Brutto Volume |
0.0002423 |
| Unit Gross Weight |
0.1 |
| Unit Net Weight |
0.08 |
| Vendor Homepage |
www.kingston.com/datasheets/KF426C16BBK2_8.pdf |
| iOS |
1.2 |
